SUPERFINE Textured Finish

Sirca Superfine is a modified acrylic, water-based exterior product specially designed as an intermediate coating. It facilitates excellent adhesion of subsequent coats. It offers a unique textured pattern which has a distinctive appeal.



Available Packs

1 Ltr.4 Ltr.10 Ltr.20 Ltr.

Directions for use


New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.

Filling for cracks

For filling cracks upto 3mm use Sirca Paints Crack Seal.


Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use SIRCA Paints Damp Block to limit further dampness. Even after cleaning if the surface shows chalkiness, use SIRCA Paints Exterior Sealer to get an even surface.

Filling for holes & dents

In case of dents and holes use SIRCA Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3.


  • Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.
  • Do not over-thin or over-extend the roller. Use of Universal Stainers or colourants is not recommended.
  • Stir well before use.
  • Clean the roller and application tools immediately after use.
  • Close the container lid firmly after use.
  • In coastal areas it is not recommended to leave the intermediate without application of topcoats for a long period of time.

Painting Care

  • For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.

Similar Products